Installing engine compartment components

Fig 1: Identifying Air Cleaner Housing, Hoses And Electrical Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to turbocharged engines, fit: 

• the control valve to the fan cover
• the charge air pipe over the engine
• the air cleaner (ACL) housing assembly with the intake manifold and connections
• the cover at the side of the air cleaner (ACL) housing (Applies only to B5254T4)
• the ground cable to the bracket on the engine (certain variants)
• the upper torque rod between the wheel housings. Tighten the screws, M10
• the screw, M12, to position rod/engine mounting. Tighten.

Fig 2: Identifying Engine Compartment Covers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Air Cleaner Housing, Vacuum Hoses And Ground Strap

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to naturally aspirated engines, fit: 

• the air cleaner (ACL) housing with the intake manifold and preheating hose
• the vacuum hoses, 2, from the intake manifold to the control valves
• the ground cable to the bracket on the engine (certain variants)
• the upper torque rod between the wheel housings. Tighten the screws, M10
• the screw, 1 x M12, to the torque rod/engine mounting. Tighten.