Installing the cable harness and transmission cables.

NOTE:

Applies only to model year 2000.

Fig 1: Identifying Gear-Shift Position Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn in the tab on the cable harness holder.

Install the screw for the gear shift position sensor/holder. Tighten. See: Summary of tightening torques for specific components .

Install the lever on the gear shift linkage rod. Tighten the nut. See: Summary of tightening torques for specific components .

NOTE:

Applies only to model year 2001.

Fig 1: Locating Gear-Shift Position Sensor Screw And Gear Shift Linkage Rod

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn in the tab on the cable harness holder.

Install:

the screw for the gear shift position sensor holder. Tighten. See: Summary of tightening torques for specific components
the lever for the gear shift linkage rod. Tighten the nut. See: Summary of tightening torques for specific components .