LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission - Removal, Replacement And Installation - 1 Of 2 >> Auxiliary Transmission, Bevel Gear And Overdrive (B5254T2, Aw50/51 AWD; 2004-2006) >> Bevel gear >> Removal >> Removing the drive shaft

Removing the drive shaft

Fig 1: Identifying Drive Shaft
GLL109861Courtesy of VOLVO CARS OF NORTH AMERICA.

Press out the wheel spindle. Detach the drive shaft from the hub. Do not damage the drive shaft boot. Use a tensioner band to pull the spring strut backwards.

Remove the screws from the bearing cap for the drive shaft. Pull the drive shaft straight out.

NOTE:

Do not pull the outer part of the shaft. Doing so could damage the axial stops in the joints.

scientia non olet · About LEMON Manuals