LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission - Removal, Replacement And Installation - 1 Of 2 >> Auxiliary Transmission, Bevel Gear And Overdrive (B5254T2, Aw50/51 AWD; 2004-2006) >> Bevel gear >> Installation >> Installing the drive shaft

Installing the drive shaft

Fig 1: Identifying Unhooking Control Arm From Ball Joint Using Lever 999 7076
GLL157718Courtesy of VOLVO CARS OF NORTH AMERICA.

Align the drive shaft in the hub.

Depress the control arm. 9997076

Align the ball joint in the control arm

NOTE:

Position the tool so that it does not damage the boot on the ball joint.

scientia non olet · About LEMON Manuals