Installing the propeller shaft

Fig 1: Identifying Propeller Shaft

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the mating surfaces on the propeller shaft CV joint and flange are clean.

Align the propeller shaft CV joint against the flange.

Install the screws loosely in the support for the center bearing and the propeller shaft

Fig 2: Installing Propeller Shaft (Front) Using Counterhold (999 5743)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the propeller shaft using the marking made earlier.

Tightening the propeller shaft CV joint 

Check carefully that the mating surfaces on the propeller shaft and flange are clean.

Use new screws.

Tighten the screws. See Summary of tightening torques for specific components .