Lifting out the engine and transmission
Lift up the power steering pump and put it to one side.
Use lifting yoke 9992810 .
Fit hook 9995185 between the engine's lifting lugs at the auxiliaries bracket and the upper torque rod bracket.
Fit lifting lug 9995464 in the exhaust manifold.
Fit mounting bracket 9995428 to the hooks and lifting lug.
Lift out the engine.
Remove the front engine pad when lifting.
Adjust the lift angle throughout the lift.
A relatively large angle is required.
NOTE:
Check carefully that the drivetrain goes clear of the bodywork and any optional equipment. Also make sure that no engine or transmission wiring catches during the lift.