Removing The Rear Wheel Hub

Raise the car.

Fig 1: Brake Disc And Locating Pin

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove 

• the wheel
• the brake caliper mounting screws. Hang the caliper up using a piece of wire
• the locating pin for the brake disc
• the brake disc
• the ABS-cable holder
• the ABS sensor. Hang up the sensor using a piece of wire.

Fig 2: Identifying Lower Control Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press up the control arm slightly. Use a mobile jack.

Fig 3: Identifying Screws And Rear Wheel Hub Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

(The illustration displays the rear wheel hub schematically)

• the screws from rear wheel hub
• the rear wheel hub.

Fig 4: Grinding Lower Rear Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.