Checking the wiring and connections

Check the wires between steering wheel angle sensor (SAS) control unit #4 (#A28) and steering wheel control unit (SWM) #3 (#A3) for an open circuit, as described in Open-circuit, intermittent faults .

Additional information: 

• To connect the test box to the steering wheel angle sensor (SAS), see Connecting the breakout box to the steering angle sensor .
• To connect the test box to the steering wheel control unit (SWM), see Connecting the breakout box .
• For information on signals, see Signal description, Control unit for the steering wheel angle sensor (SAS) and Signal specification .

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information