Internal pipe steering gear: Installation: Notes

Fig 1: Identifying Sealing Rings On Oil Pipes

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the new sealing rings on the oil pipes. Lubricate the sealing rings.

Fig 2: Identifying Pipes With Sealing Rings

Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully install the new pipes with the sealing rings on the steering gear.

NOTE: Use a new screw for the holders for the pipes.

Tighten all pipe nuts to 7 Nm.

Tighten the screw to the holder. Tighten to 12 Nm.

Install the protective panel over the pipes.