Checking component

Check the control module and SRS system connectors to ensure that no terminal pins are damaged. Also check the wiring.

Check that the correct control module is installed in the car. Read off by clicking the VCT2000 symbol.

Check that the switch for the right seat belt tensioner on the 3rd seat row is not connected to a seat belt tensioner if the car is a 5-seat model.

Replace the control module if no fault is found.

Other information: 

• To access or replace the control module, see Supplemental restraint system module (SRS), replacing
• See Signal specification (1999-2004).
• See Signal specification (2005-2006).

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification