Checking cable

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Disconnected

Courtesy of VOLVO CARS OF NORTH AMERICA.

WARNING:

Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed, pyrotechnical seat belt tensioner. This could deploy the seat belt tensioner

The probable cause of this fault is that the terminal nearest the left seat belt tensioner on the 3rd seat row is defective. Try replacing the wiring for the seat belt tensioner.
Remedy as necessary.

Other information:
- To access and replace the seat belt tensioner, see Seat belts, replacing
- For information about the repair of SRS wiring, see Cable harness SRS system, repair .

Continue
Refer to Verification