Removing the front seat belt (inertia) reels

Fig 1: Locating Front Seat Belt (Inertia) Reel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the B-post panel according to Panel, B-post, replacing
• seat belt buckle end mounting.
• the connector. See Igniter wire connector
• screws (x 2)
• seat belt (inertia) reel with seat belt tensioner by pulling it straight up.

Remove the seat belt (inertia) reel and the seat belt tensioner by pulling the unit straight upwards and leaving the clips and fixture in place.