LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Interior Equipment - Removal, Replacement And Installation >> Seat Belts And Other Retention Systems (1999-2004) >> End mounting, replacing >> Installation >> Installing front end mountings

Installing front end mountings

NOTE:

For tightening torques, see: Tightening torque .

Fig 1: Identifying Seat Belt And End Mounting
GLL141257Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

Press the seat belt into the end mounting.

NOTE:

A clear click is heard when the seat belt has locked correctly with the end mounting.

NOTE:

Also check that the seat belt has locked correctly with the end mounting by looking at the reverse of the end mounting.

A  = Correctly locked position.

B  = If the lock facing does not lock correctly with the end mounting, see A, replace the end mounting with a new  one.

NOTE:

Check that the seat belt is secure by jerking it hard in an upwards direction.

Reinstall the side panel. See: Side panel (-2004) or: Side panel front seat, replacing (2005-).

scientia non olet · About LEMON Manuals