Installing the condenser

Fill the condenser with oil. See Oil air conditioning (A/C) system, filling .

Install the condenser with the 2 lower retaining screws (M6). Tighten.

Guide the left AC pipe into place against the condenser connection and fasten with the clip.

Install: 

• the right AC pipe with the 1 M6 screw and tighten.
• the pressure sensor and tighten
• the connector.

Raise the vehicle.

Install: 

• the condenser's 2 upper mountings (M6) and tighten
• the left AC pipe (1 M8) and tighten
• the left headlight:
  • For -2004 see: Headlamp/bulb, replacing
  • For 2005- see: Headlamp/bulb, replacing .