Signal too high / Signal too low: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Check that the relevant diagnostic trouble code (DTC) has switched status from permanent to intermittent fault.

  Check also that diagnostic trouble code (DTC) CCM-0070, CCM-0071 CCM-0072 or CCM-0073 has not been stored during identification of the damper motors.

  These diagnostic trouble codes (DTCs) can only be stored when identifying damper motors. They mean that the identification has failed for some reason.

  Remedy by correctly identifying the damper motor. Fault-trace according to the relevant information.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Has the status of the diagnostic trouble code (DTC) changed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information