Faulty signal: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.
• Blower motor on.

  Check that damper motor position changes by activating and de-activating from control panel. The values given below are the standard values that the damper motor positions should give.

  • Left/right temperature damper motor and defroster, 0-100%
  • Recirculation damper motor, 40-100%
  • Floor/ventilation damper motor, floor only approximately 39%, ventilation only approximately 87% and floor/ventilation approximately 71%.
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does damper motor work? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information