Checking the switch status

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
  NOTE:

  The switches can be placed in any position in the climate control assembly (without internal order). The position of the switches must be taken into account when fault-tracing with VCT2000.

  The switch that is furthest to the left in the climate control assembly corresponds to no. 1 in VCT2000. VCT2000 then follows the numbering in order to the switch furthest to the right, which is designated no. 7.

  Read off the status of the switches. Check that the read off status is OK for each switch. If the status is not OK, this indicates that the function of the switch is not in the Car Configuration.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Was a fault detected? 

• YES 

  Refer to Information 

• NO 

  FAULT NOT FOUND:  Troubleshooting has been completed.