Activated too long. Permanent fault: Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off.NOTE:
Wait at least 1 minute before "Ignition on". This is to allow the climate control module (CCM) to carry out a new diagnostic.
- Reinstall the connectors, components etc.
- Ignition on
- Read off diagnostic trouble codes (DTCs).
The fault is no longer present if the status of the diagnostic trouble code (DTC) has changed to intermittent.
Does the status change?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to Information