Checking the wiring
Check the control module (terminal #B19) and damper motor connector terminal #1. Check for contact resistance and oxidation. Check for loose connections. Check for damage carefully.
Check the signal cable between control module terminal #B19 and damper motor terminal #1. Check for an intermittent open-circuit.
Check the wiring between the right-hand temperature damper motor and the defroster damper motor. Check for an intermittent open-circuit.
Check the signal cable between control module terminal #B19 and damper motor terminal #1. Check for an intermittent short-circuit to supply voltage.
- Continue
Refer to Information