Checking the wiring
Check the control module connector (terminal #B18) and damper motor connector terminal #1. Check for contact resistance and oxidation. Check for loose connections. Check for damage carefully.
Check the signal cable between control module terminal #B18 and damper motor terminal #1. Check for an intermittent open-circuit.
Check the wiring between the right-hand temperature damper motor and the left-hand temperature damper motor. Check for an intermittent open-circuit.
Check the signal cable between control module terminal #B18 and damper motor terminal #1. Check for an intermittent short-circuit to supply voltage.
- Continue
Refer to Information