Signal too high: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.

  Check solar input signal by varying light intensity on solar sensor. Cover solar sensor, for example with hand, to get minimum signal. Shine, for example, a powerful torch close to the solar sensor to get a maximum signal.

  The value should vary between approximately 0 and 1000 W/m² .

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the value OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information