Installing ignition coil

Fig 1: Identifying Ignition Coil

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new coil.

Align the coil and press down. Install the screw. Tighten to 10 Nm (7.4 lb. ft)  .

Press in the connector until a clicking sound is heard.

Install the ignition coil cover.

Install upper camshaft belt cover.

Applies only to B6xx4T 

Remove the seals.

Install the plastic hoses between the turbocharger (TC)/charge air cooler and the air cleaner (ACL)/turbocharger (TC).