Fault-tracing information

Fig 1: Checking Traffic Load On CAN Cables

Courtesy of VOLVO CARS OF NORTH AMERICA.

The fault tracing that follows depends on whether the software in the control module is upgraded. The control module's software version can be read out using VIDA vehicle communication. Requires Volvo scan tool.

• Ignition on.
• Read out the control module's software.

Check, using the identification of the upgraded software Engine control module (ECM)/Electronic throttle module (ETM) that the correct software is in the Electronic throttle module (ETM) and the Engine control module (ECM). Identifying upgraded software ECM/ETM

Select one of the following options: 

1. The software is not upgraded.

   Refer to Checking the throttle unit 

2. The software is upgraded.

   Refer to Checking the throttle unit 

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.