Checking components
Check that the engine speed (RPM) sensor is correctly installed.
Check the engine speed (RPM) sensor. Check that it is not damaged or dirty.
HINT: The diagnostic trouble code (DTC) can be caused by damage in the flywheel / carrier plate. Look for damage to the flywheel / carrier plate.
Other information
- For B5xx4T -2001, see Replacing the engine speed (RPM) sensor
- For B5xx4T 2002-, see Replacing the engine speed (RPM) sensor
- For B6xx4x -2001, see Replacing the engine speed (RPM) sensor
- For B6xx4x 2002-, see Replacing the engine speed (RPM) sensor .
- Continue
Refer to Verification