Checking cables
Check fuel tank pressure sensor connector for contact resistance and oxidation according to Contact resistance and oxidation and loose connections according to Loose connections (terminals) . Check particularly for any damage.
Check signal cable between control module #B31 (#B41) and fuel tank pressure sensor connector #2 for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Check power supply cable between control module #B10 (#B20) and fuel tank pressure sensor connector #3 for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- For information about signals, see Signal specification .
- Continue
Refer to Information