Checking hoses

Check that the EVAP canister shut-off valve is not sealed.

Check that the EVAP canister shut-off valve filter is not sealed.

Check the hoses between the EVAP canister and the EVAP canister shut-off valve and between the EVAP canister shut-off valve and its filter for blockages and crimping.

Check the EVAP canister shut-off valve terminal in the EVAP canister for blockage.

Remedy as necessary.

• To access / replace the EVAP canister shut-off valve see Replacing the shut-off valve for the carbon filter container .

• Continue 

  Refer to Verification information