Faulty signal. Permanent fault: Verification: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off.
- Reinstall the connectors, components etc.
- Start the engine.
Check that the misfire counter is not counting upwards. Check that the engine is firing on all cylinders. Also check if the misfire diagnosis is active, if not, check the conditions according to:
- For -2001, see Misfire diagnostic
- For 2002-, see Misfire diagnostics .
Does the misfire counter count up?
- YES
Refer to Information
- NO
VERIFIED: Troubleshooting has been completed.