Checking cables
Check signal cable between ignition coil #1 and control module:
- #A31 (#A31) (ECM 3300)
- #A50 (#A50) (ECM 3310)
- #A52 (#A52) (ECM 3320)
- #A49 (#A49) (ECM 3330)
- #A30 (#A30) (ECM 3340)
- #A51 (#A51) (ECM 3350)
for an intermittent short-circuit to ground according to Short-circuit to ground, permanent faults .
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access/replace the ignition coil, see Replacing ignition coil .
- For information about signals:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .
- Continue
Refer to Information