Checking wiring and components: Notes

Check signal cable between ignition coil #1 and control module:

#A31 (#A31) (ECM 3300)
#A50 (#A50) (ECM 3310)
#A52 (#52) (ECM 3320)
#A49 (#49) (ECM 3330)
#A30 (#30) (ECM 3340)
#A51 (#A51) (ECM 3350)

and the power supply between system relay #3 and ignition coil #4 for an open-circuit according to Open-circuit, permanent faults .

Remedy as necessary.

Other information

Connecting the breakout box/accessing the control module, see Connecting the breakout box .
To access/replace the ignition coil, see Replacing ignition coil .
For information about signals:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ignition Coil

Courtesy of VOLVO CARS OF NORTH AMERICA.