Checking cables
Check signal cable between heated oxygen sensor (HO2S)) #2 and control module #A36 (#A36) for an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access/replace the heated oxygen sensor (HO2S), see Heated oxygen sensors (HO2S), replacing .
- For information about signals:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .
- Continue
Refer to Information