Checking cables
Check signal cable between heated oxygen sensor (HO2S) #2 and control module #A35 (#A35) for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Other information
- Connecting the breakout box/accessing the control module, see Connecting the breakout box .
- To access/replace the heated oxygen sensor (HO2S) for 5 cylinder engines, see Replacing lambda probes .
- To access/replace the heated oxygen sensor (HO2S) for 6 cylinder engines, see Heated oxygen sensors (HO2S), replacing .
- For information about signals on 5-cyl engines, see Signal specification .
- For information about signals on 6 cylinder engines:
- For 6 cylinder engines -2001, see Signal specification
- For 6 cylinder engines 2002-, see Signal specification
- For 6 cylinder engines -2004, see Signal specification
- For 6 cylinder engines 2005-, see Signal specification .
- Continue
Refer to Information