Checking the connector

Check the connector for the rear heated oxygen sensor (HO2S) (bank 2). Check for contact resistance and oxidation. Remedy if necessary.

Try a new heated oxygen sensor (HO2S) if the above fault-tracing does not remedy the fault.

Other information 

• See Heated oxygen sensor (HO2S), replacing
• See Contents

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Rear Heated Oxygen Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification