Installing Components

Fig 1: Engine And Stabilizer Brace

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the connector for the heated oxygen sensor (HO2S) (turbocharger (TC) 2)
• the intake and charge air pipes
• the hose from the pressure regulator to the T piece (turbocharger (TC) 2)
• the plastic charge air pipe
• the plastic intake pipe
• the connector for the heated oxygen sensor (HO2S) (turbocharger (TC) 1). Clamp the wiring for the heated oxygen sensors (HO2S)
• the screw for the engine stabilizer brace mounting on the engine
• the cross stay between the suspension turrets
• the expansion tank cap.