Installing Components On The Turbocharger (TC)

Fig 1: Identifying Turbocharger, Oil Pressure Pipe And The Oil Return Line

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the oil pressure pipe in the cylinder block with the pipe screw. Use new gaskets. Do not tighten
• the oil return line in the cylinder block with a new sealing ring
• the 2 x screws for the oil return line in the turbocharger (TC). Use a new gasket. Tighten
• the lower and upper coolant pipe and pipe screws. Tighten. See: Summary of specific components and tightening torques
• the clamp between the oil pressure pipe and the return pipe. Tighten.