Replacing Intake Pipe And Gasket: Finishing

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• the fuel distribution pipe.

  Press together the quick-coupling. Use new screws  . Tighten with 10 Nm  .

• connectors for the injector valves and the cover plate.
• the vacuum hoses according to the earlier markings
• plastic charge-air pipe.
• connectors for sensors in the plastic charge-air pipe.
• connectors for the throttle body.
• air baffle from the control module box at the electric cooling fan shroud.
• the dip stick in the intake manifold.