Flywheel And Variable Valve Timing Unit - Checking/ Adjusting, Removal And Installation

• Engine Mechanical
  • Replacing the flywheel (B6284T)
    • Notes
    • Removal
      • Preparations
      • Removing the flywheel
      • Checking the crankshaft seal
    • Installation
      • Installing the flywheel
      • Finishing
    • Pressure plate / clutch driven plate, replacing
      • Notes
      • Removal
        • Blocking the flywheel
        • Aligning the counterhold for automatic clutch adjustment
        • Installing the compression tool
        • Relieving the load from the clutch diaphragm spring
        • Checking the clutch
        • Checking the pressure plate for out-of-true
        • Checking the clutch driven plate
        • Checking that there are no cracks or large scratches on the flywheel
      • Installation
        • Installing the centering tool for the clutch driven plate
        • Installing the clutch driven plate
        • Installing the tools on the clutch
        • Installing the clutch
        • Removing the tools
  • Replacing the flywheel (B5254T2)
    • Notes
    • Removal
      • Preparations
      • Removing the flywheel
      • Checking the crankshaft seal
    • Installation
      • Installing the flywheel
      • Finishing
    • Pressure plate / clutch driven plate, replacing
      • Notes
      • Removal
        • Blocking the flywheel
        • Aligning the counterhold for automatic clutch adjustment
        • Installing the compression tool
        • Relieving the load from the clutch diaphragm spring
        • Checking the clutch
        • Checking the pressure plate for out-of-true
        • Checking the clutch driven plate
        • Checking that there are no cracks or large scratches on the flywheel
      • Installation
        • Installing the centering tool for the clutch driven plate
        • Installing the clutch driven plate
        • Installing the tools on the clutch
        • Installing the clutch
        • Removing the tools
  • Variable valve timing unit, checking and adjusting (B5XX4S; B6294S; B5XX4S3; 1999-2001)
    • Notes
    • Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft
    • Installing the crankshaft adjustment tool
    • Aligning the crankshaft
    • Installing the variable valve timing unit on the camshaft
    • Installing the timing belt
    • Install the timing belt (continued)
    • Tighten the timing belt
      • Adjust the belt tensioner
      • Tension the timing belt as follows:
      • Checking the markings and belt tension
  • Variable valve timing unit, checking and adjusting (B5XX4TX; 1999-2001)
    • Notes
    • Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft
    • Installing the crankshaft adjustment tool
    • Aligning the crankshaft
    • Installing the variable valve timing unit on the camshaft
    • Installing the timing belt
    • Install the timing belt (continued)
    • Tighten the timing belt
      • Adjust the belt tensioner
      • Tension the timing belt as follows:
      • Checking the markings and belt tension
  • Variable valve timing unit, checking and adjusting (B5XX4TX; 2002-)
    • Notes
    • Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft
      • Notes
      • Installing the crankshaft adjustment tool
      • Aligning the crankshaft
      • Installing the variable valve timing unit on the camshaft
      • Installing the timing belt
      • Tensioning of cambelt
      • Tightening
      • Final check