Removing The Three-Way Catalytic Converter (TWC) (All-Wheel Drive (AWD) Only)
Remove
- the nuts where the exhaust pipe divides downstream of the three-way catalytic converter (TWC)
- the screws securing the SIPS member to the bodywork.
Remove the brake pipe from the holders on the SIPS member.
Lift off the front exhaust pipe from the turbocharger (TC) and the rear system.
Lower and pull back the three-way catalytic converter (TWC) with the SIPS member.
NOTE:
The routing of the heated oxygen sensor's cable harness over brake pipe.