Removing Components

Fig 1: Identifying Splash Guard Under The Engine

Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car.

Remove 

• the left and right front wheels
• the splash guard under the radiator
• the splash guard under the engine.

Fig 1: Expansion Tank

Courtesy of VOLVO CARS OF NORTH AMERICA.

Expose the wiring for the front heated oxygen sensor (HO2S).

Disconnect the connector for the level sensor in the expansion tank.

Remove 

• the heat deflector plate above the turbocharger (TC)
• the hoses for the heater unit at the terminal in the firewall
• the bleed hose for the radiator at the expansion tank
• the ABS line and clips and the power steering hose.

Lift up the power steering fluid reservoir and the expansion tank. Place them on top of engine.