Removing The Engine Control Module (ECM)

Fig 1: Identifying Engine Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off. Wait 2 minutes.

CAUTION:

Do not touch the terminal pins on the engine control module (ECM) with your fingers. Static electricity may damage components in the control module.

Remove the cover over the control module box. Put the cover to one side.

Insert tool: 9995722 around the control module. Move the upper section of the tool backwards as far as it will go. Pull up the tool. Carefully pull up the control module.

For vehicles with automatic transmissions repeat the above work.

Remove the surround from around the control module box.