Replacing The Rear Seal

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

The following components must be removed when replacing the rear seal: 

• the cross stay between the suspension turrets
• the air hose from the air cleaner (ACL) to the turbocharger (TC). Place to one side. Seal the openings
• place the air cleaner (ACL) cover to one side
• the charge air pipe over the engine. Seal the openings
• the cover over the ignition coils
• the upper torque rod bracket
• the camshaft position sensor (CMP) housing and trigger wheel.