LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Engine Mounting (1999-2006) >> Bushing Sub-Frame, Replacing >> Removing The Lifting Lug And The Lifting Hook From The Engine And The Car (6- Cylinder Engines Only)

Removing The Lifting Lug And The Lifting Hook From The Engine And The Car (6- Cylinder Engines Only)

Fig 1: Identifying Special Tool 999 5717 (Lifting Lug) And Engine Mounting Screws
GLL109241Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the lifting lug from the engine. Reinstall the screws. Tighten to 50 Nm  .

Reinstall the spark plug cover. Tighten the screws. Tighten to 10 Nm  .

Install the ground strip. Tighten to 10 Nm  .

Lift up the delivery lines. Install the spark plug cover (applies only to turbo cars  ).