LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Engine Mounting (1999-2006) >> Bushing Sub-Frame, Replacing >> Installing The Vibration Damper (6-Cylinder Engines Only)

Installing The Vibration Damper (6-Cylinder Engines Only)

Fig 1: Identifying Vibration Damper Screws, Counterhold And Crankshaft Central Nut
GLL108801Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the vibration damper using new screws  . Tighten to 35 Nm  . Angle-tighten 50°  . Use the crankshaft center nut as a counterhold.

scientia non olet · About LEMON Manuals