Replacing Auxiliaries Belt

Fig 1: Identifying Vibration Damper Screws, Counterhold And Crankshaft Central Nut

Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car and remove 

• the right front wheel
• the plastic nuts from the cover in the fender liner
• the vibration damper. Use the crankshaft center nut as a counterhold
• the auxiliaries belt.

Install 

• new auxiliaries belt
• the vibration damper. Tighten to 35 Nm  . Angle-tighten 50°  . Use the crankshaft center nut as a counterhold.

  Use bevel protractor 9512050

• the plastic nuts from the cover in the fender liner
• the wheel. See Installing wheels .