Auxiliaries Belt / Belt Tensioner, Replacing: Finishing

Fig 1: Identifying Auxiliaries Belt And Pulleys

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a 15 mm wrench and turn clockwise as far as possible to relieve the load.

Install the belt in the following order:

• Crankshaft
• Air conditioning (A/C) compressor
• Belt tensioner
• Generator (GEN)
• Servo pump.

Install the servo reservoir.

Test the function. 

Fig 2: Identifying Trigger Wheel, Camshaft Position (CMP) Sensor Housing, Air Cleaner (ACL) Cover, Intake Manifold Between Electronic Throttle Module (ETM) & Engine Stabilizer Brace

Courtesy of VOLVO CARS OF NORTH AMERICA.