LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6294T; 2002-2006) >> Cylinder Head/Gasket, Replacement >> Installing The Cylinder Head / Gasket >> Installing The Intake Pipe For The Coolant Pump

Installing The Intake Pipe For The Coolant Pump

Fig 1: Coolant Pump Inlet Pipe
GLL102978Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Apply thread sealant 116 1056  on the screws.

Install: 

scientia non olet · About LEMON Manuals