LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6294S2; 2002-2006) >> Cylinder Head/Gasket, Replacing >> Installing The Cylinder Head Gasket >> Installing The Rear Camshaft Seal

Installing The Rear Camshaft Seal

Fig 1: Rear Camshaft Seal
GLL103902Courtesy of VOLVO CARS OF NORTH AMERICA.

Use drift 9995450 .

Lubricate the surface of the seal that the camshaft rotates against.

Press in the seal until the drift bottoms out.

NOTE:

If the shaft journal is showing signs of wear, the seal can be pressed in a further 2 mm  by turning the drift socket.

scientia non olet · About LEMON Manuals