Removing The Timing Gear Pulley

Fig 1: Camshaft Adjustment Tool 999 5452 At Rear Of Camshafts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install tool 9995452 at the rear of the camshafts.

Remove 

• the variable valve timing unit center plug.
• variable valve timing unit center screw.

  Pull / pry off the variable valve timing unit and timing belt pulley.

• screws holding the timing belt (without the variable valve timing unit) to the camshaft.
• the timing belt pulley.
• tool 999 5452.