Removing Components From Turbo 2

Fig 1: Installing Torque Rod Bracket, Upper Screw Securing Automatic Transmission Dipstick Pipe To Engine & Ground Leads

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove from turbo 2 

• the heat deflector plate.
• the ground strips between the engine and the firewall.
• the upper screw of the automatic transmission dipstick tube.

  Loosen the lower.

• the torque arm bracket.
• intake and charge air pipes, plug the openings.
• the hose from the pressure regulator.
• the clamp between the coolant pump inlet pipe and the turbocharger oil pressure pipe.