Removing The Cylinder Head Gasket: Preparation

Fig 1: Battery Negative Lead, Radiator Breather Tube By Expansion Tank, Right-Hand Drive Shaft, Bearing Seat & Pipe Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

The terms turbo 1 and turbo 2 are used to simplify the text below. Turbo 1 stands for the turbocharger for cylinders 1, 2 and 3. Turbo 2 stands for the turbocharger for cylinders 4, 5 and 6. 

Remove 

• the negative battery cable. First read Battery, disconnecting .
• the radiator breather tube by the expansion tank. Install lock grip pliers.
• the right drive shaft. See: Drive shaft right, replacing .
• the bearing seat for the drive shaft from the cylinder block.
• the pipe screw for the turbocharger oil pressure pipe by the cylinder block.