LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6284T; 2000-2001) >> Cylinder Head/Gasket, Replacement >> Installing the cylinder head gasket >> Installing The Rear Camshaft Seal

Installing The Rear Camshaft Seal

Fig 1: Rear Camshaft Seal
GLL103888Courtesy of VOLVO CARS OF NORTH AMERICA.

Use drift 9995450 .

Lubricate the surface of the seal that the camshaft rotates against.

Press in the seal until the drift bottoms out.

NOTE:

If there are wear grooves on the camshaft, the seal can be pressed in another 2 mm by reversing the tool's sleeve.

scientia non olet · About LEMON Manuals